ProTek R/C 5-Cell 6.0V NiMH Intellect Hump Receiver Pack (IB1600)

This receiver pack is hand soldered using the highest quality Intellect 1600mAh NiMH cells and features a JR style connector. This is the preferred style of receiver pack for most 1/10 gas trucks, and will fit into most 1/8th scale vehicles that use a hump style pack. The recommended charge rate for these batteries is 1A for the best battery life and run time, but you can charge them at more than 1C if you wish (1.6A).

Click Here To Download Product Manual

Specifications: 
Type: 2/3 A NiMH Receiver 
Capacity: 1600mAh 
Voltage: 6.0V Nominal 
Number of Cells: 5 
Weight: 123g 
Dimensions (WxLxH): 30x56x32mm 
Configuration: 3x2 Hump Pack 
Connector: JR Style

Recommended guidelines for handling Intellect 2/3A NiMH batteries: 

• 1. Charge the battery with a quality charger, at a maximum current of 1-2A.
• 2. Charger cut-off setting: Peak voltage = 5mV per cell, Temperature <55ºC, and best with timer. [Example on Peak voltage calculation: 6-cell pack = 5mV x 6 = 0.03V]
• 3. The battery can offer high current discharge, and are rated to a level of 5~10A (plug dependent).
• 4. If you expect to leave the battery idle for >2 weeks, charge it for 1/3 capacity (say, 1A for 20 minutes)
• 5. Avoid storing the battery in hot or humid environment. Best temperature would be around 20~25ºC.